Runs the main and branch lines to find corrosion, root intrusion and bellies before we quote. You see the footage, so the scope is based on what is actually in the pipe.
Pipe Replacement southlake TX done right the first time
When your pipes start failing, pipe replacement southlake TX homeowners trust means tearing out the old line and putting in something that lasts.
Serving southlake and nearby areas.
How big is the pipe replacement job?
Partial repipe
Several runs replaced, usually one side of the house or one floor.
- 1. Single run One failing line or branch replaced, with the rest of the system left in place.
- 2. Partial repipe Several runs replaced, usually one side of the house or one floor.
- 3. Whole home Every supply line replaced, planned in writing first.
Drag the needle to compareTouch and drag the needle
- 30Services from one local team
- 20Areas served around southlake
- Camera firstWe inspect the line before we quote
- Pressure testEvery joint checked before walls close
What our pipe replacement service includes
Every repipe we quote covers the full job: inspection, permit, materials, labor, testing and cleanup. You are not paying extra for the camera run or the inspection sign-off.
Work order
Pipe Replacement- Camera inspection and findings: A video camera inspection system runs the main and branch lines before we quote. You see the footage and get photos of every problem area. This is how we decide between a single-run repair and a full repipe, and you get the evidence in writing.
- Permit and city inspection: We pull the pipe replacement permit southlake requires and schedule the inspection. We stay on site for it and hand you the signed-off paperwork for your records. That document matters at resale and we make sure you have it.
- New copper or PEX supply lines: We install copper pipe or PEX tubing throughout, with brass fittings, proper solder or press joints, and Teflon tape or pipe thread sealant on every threaded connection. Material spec is listed in your written scope before work starts.
- New shutoff valves and supply lines: Every fixture gets a new shutoff valve and new supply lines. You get a main shutoff you can actually turn by hand.
- Pressure test and leak check: We pressure-test the new system at 100 PSI for at least an hour and check every joint with leak detection equipment. Nothing gets closed up until it holds. If a joint weeps, we fix it before the drywall goes back.
- Drywall patch and site cleanup: We patch the access openings, haul away the old pipe, and clean the work area before we leave. You are not left with a construction site. Floors and furniture get protected on day one and the house is livable throughout.
What the first visit covers
First visit
We run the camera, check pressure at the fixtures, and show you what is failing before any work is scheduled.
Pipe replacement at Southlake homes
Supply and drain lines replaced in occupied homes, with water back on fast.
Slab leak reroute
Supply moved overhead so the slab stays intact.
Galvanized repipe
Old steel lines cut out and replaced throughout.
Polybutylene swap
Failing poly lines replaced with PEX or copper.
Freeze damage repair
Cracked attic lines replaced and insulated.
Pipe replacement at Southlake businesses
Supply and drain line work scheduled around your operating hours.
Retail buildouts
New supply lines tied in before occupancy.
Restaurant lines
Supply and drain work around service hours.
Office properties
Branch line replacement with minimal tenant disruption.
What pipe replacement southlake TX actually involves
Pipe replacement is worth doing properly because a patch buys months while a repipe buys decades. We inspect first, replace what is failing, and test every joint before the walls go back up.
Pipe replacement southlake TX is the full removal and reinstallation of your home's water supply or drain lines, not a patch on one section. We map the existing system with a video camera inspection system, cut out the failing runs with a pipe cutter, and install new copper pipe or PEX tubing with brass fittings. Every joint gets soldered or pressed, then pressure-tested before we close anything up. A typical whole-home repipe runs 1 to 3 days depending on square footage and how many fixtures you have.
Homes in Tarrant County built before 1990 often still have galvanized steel or early polybutylene lines that corrode from the inside out. You might notice low water pressure at the shower, brown water after a vacation, or a slab leak that keeps coming back. When you call us for pipe replacement near me southlake TX, we start with leak detection equipment and a camera run so you know exactly what is failing before we quote the job.
- What it is
- Full removal and reinstallation of failing supply or drain lines.
- When it helps
- Recurring leaks, low pressure, rusty water or freeze damage.
- What you get
- New copper or PEX lines, new valves, tested and permitted.
How our pipe replacement process works
You get a written scope, a start date and a finish date.
Tools and methods we use on every repipe
Each method answers a different question. Together they leave very little to guess.
Pinpoints slab leaks and hidden leaks without breaking concrete. We use it before and after the repipe to confirm the fix holds.
Cuts out old lines cleanly and presses new PEX and copper joints in seconds. Press joints are faster and more consistent than solder on tight attic runs.
Used for copper pipe joints where a soldered connection is the right call. We keep the torch on every truck for copper repipes and repairs.
For shutoff valves, drain connections and clearing blockages in branch lines during the repipe. Standard gear, but it saves a second service call.
When Southlake homeowners call for pipe replacement
A 1978 home in Shady Oaks still has the original galvanized steel supply lines and has had two leaks in 18 months.
We camera the system, confirm the corrosion is throughout, and repipe the whole house in PEX tubing through the attic.
HomesA two-story home in Clariden Ranch has a slab leak in the kitchen line and the homeowner wants to avoid jackhammering the floor.
We isolate the leaking run, reroute the supply overhead through the attic in copper pipe, and tie it back into the main.
HomesA commercial buildout near Southlake Town Square needs new supply lines to meet code before tenant occupancy.
We run the camera and pressure test on the existing system, then replace the failing runs in copper pipe with brass fittings,…
BusinessesA homeowner in Stone Lakes is selling in 60 days and the buyer's inspector flagged polybutylene supply lines.
We repipe the whole house in PEX, pull the permit, and complete the job in two days so the closing timeline holds.
Homes
How pipe replacement runs in Southlake, Texas
Southlake sits in Tarrant County, and the housing stock here splits into two clear groups. Homes built before 1990 in neighborhoods like Shady Oaks and Meadowmere often still have galvanized steel or polybutylene supply lines that are at the end of their life.
Timarron
Mix of 1990s and 2000s builds with copper supply lines. We see joint failures after hard freezes, often in attic runs above the second floor.
Shady Oaks
Older homes with original galvanized steel. Full repipes are common here because patch repairs stack up fast on corroded lines.
Clariden Ranch
Larger two-story homes with long attic runs. Slab leaks are less common, but freeze damage to overhead copper is a recurring call.
- Timarron
- Shady Oaks
- Clariden Ranch
- Southlake Town Square
- Stone Lakes
From problem to finished result.
Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.
PhotoGalvanized repipe in Shady Oaks
Before: A 1978 home had original galvanized steel supply lines with two leaks in 18 months. Pressure at the master shower measured 32 PSI, and the water ran brown after any vacation. The homeowner was facing a third patch repair.
After: We repiped the whole house in PEX tubing through the attic in two days. Pressure at the master shower now measures 62 PSI, water runs clear, and every fixture has a new shutoff valve. The city inspection passed on the first visit.
Slab leak reroute in Clariden Ranch
Before: A two-story home had a slab leak under the kitchen line. The homeowner had already paid for one patch repair that failed within a year, and did not want to jackhammer the kitchen floor again. Moisture was starting to lift the tile.
After: We isolated the leaking run and rerouted the supply overhead through the attic in copper pipe. The slab stayed intact, the kitchen floor was untouched, and the leak stopped. Total job time was one day, with water back on by evening.
Polybutylene replacement in Stone Lakes
Before: A homeowner selling in 60 days had a buyer's inspector flag polybutylene supply lines throughout the house. The closing timeline was tight.
After: We repiped the whole house in PEX in two days, pulled the permit, and passed inspection. The buyer's objection cleared, the price reduction came off the table, and the closing stayed on schedule. The seller got the material list and permit sign-off for the file.
Pipe problems we solve for Southlake homeowners
Most repipes start with one of these four symptoms. If you recognize yours, the camera run will tell us how far the damage goes.
Recurring slab leaks under the foundation
Meanwhile the moisture can damage flooring and foundation soils.
Brown or rusty water at the taps
Galvanized steel and old steel lines shed rust and sediment into your supply.
Low water pressure throughout the house
Corroded pipe narrows from the inside, so pressure drops at every fixture.
Frozen and burst pipes after a hard freeze
North Texas freezes crack copper in attics and exterior walls.
Why Southlake homeowners replace pipes instead of patching
Patching a failing line buys you months. Replacing it buys you decades. Here is what a proper repipe gets you.
Water pressure restored
Corroded galvanized pipe narrows to the diameter of a pencil over time.
No more repeat slab leaks
Whole house pipe replacement southlake Texas reroutes the line overhead through the attic, so the slab stays untouched and the leak risk moves out…
Cleaner water at every tap
Old steel and poly lines shed rust and sediment into your supply.
Higher resale value
Southlake buyers and inspectors flag galvanized and polybutylene plumbing fast.
What you receive on the job
Clear records you can keep and share.
Camera findings
Photos and footage of the failing lines.
Written scope
Material spec and total price before work starts.
Permit sign-off
Inspection paperwork for your records.
16 years of Southlake repiping experience
Southlake Oakline Plumbing has been replacing pipe in Tarrant County since 2010.
Camera footage
Read frame by frame to find corrosion, root intrusion and bellies in the line.
Pressure gauge
Read at the fixture and at the main to confirm where pressure is being lost.
Material spec sheet
Checked against the written scope so the installed pipe matches what you approved.
Is your Southlake neighborhood covered?
Type your ZIP code or town to check. If you are nearby and not listed, call and ask.
southlake ZIP codes
- 76092
Towns we serve.
Based in southlake and covering the places around it. Pick one for local details.
What Southlake homeowners say
We had two slab leaks in three years and finally decided to repipe the whole house. The crew ran the camera first, showed us the corroded galvanized line, and had new PEX in the attic by the end of day one. Water was back on that evening. Pressure at the master shower went from a trickle to normal. Should have done it after the first leak.
Our 1985 house still had polybutylene and we were nervous about a failure while we were at work. They pulled the permit, replaced every supply line with copper, and patched the drywall cleanly. The city inspection passed first time. They walked me through the new shutoff and left the permit paperwork in a folder on the counter.
We manage several rentals and had a copper line fail in one of them. They camera'd the run, found two more weak spots, and replaced the whole branch instead of patching one joint. Tenants were only without water for a few hours. Pricing matched the written scope exactly, no add-ons at the end.
Frequently Asked Questions
Short answers for the first few minutes. The team can cover the rest.
Still have a question?
Describe what you are seeing and we will point you to the right next step.
(682) 470-5111The cost to replace pipes southlake depends on square footage, how many fixtures tie in, whether you choose copper or PEX, and how much drywall access the job needs. We quote after the camera inspection so the number is real.
A typical Southlake home takes 1 to 3 days. Single-story homes with two bathrooms usually finish in a day and a half, with water back on the first evening. Two-story homes, larger properties in Timarron or Clariden Ranch, and jobs that require attic rerouting can run 3 to 5 days. We give you a start date and a finish date in writing before we begin.
Not always. If your home has galvanized steel, polybutylene or copper that is failing in multiple spots, whole house pipe replacement southlake Texas is usually the smarter spend because patch repairs stack up fast. If one run failed and the rest tests clean on camera, we will tell you to repair that run and leave the rest alone. The camera decides, not a sales script.
Copper pipe is the traditional choice and lasts 50-plus years, but it costs more and sweats in attic heat. PVC pipe and CPVC pipe are for drain and vent lines, not supply. We spec the material to your house and explain why.
Related Services
Other services from the same team.
- Repiping ServicesHomes with galvanized or failing polybutylene pipe often need a full repipe.
- Faucet RepairA dripping faucet wastes water and drives up your bill.
- Faucet InstallationNew faucet installation includes removing the old fixture, cleaning the mounting surface, and connecting the supply lines.
Get your pipe replacement southlake TX quote today
(682) 470-5111We pull the permit, run the camera, and give you a written scope before we cut a single line. Call Southlake Oakline Plumbing and get your repipe scheduled this week.
contact Southlake Oakline Plumbing
Call us at (682) 470-5111 for same-day service or to schedule an appointment. You can also email [email protected] or stop by our office in Southlake.